Call FREE for expert advice
0808 196 9380
33L Per Day Capacity: Large capacity from a compact unit. Ideal for drying spaces out following leaks & floods, drying rooms following construction work, drying materials and ingredients in storage, and preventing moisture damage & corrosion.
Tough Stainless Steel Casing: The Cotes CR400B dehumidifier is resistant to corrosion, suitable for a range challenging environments.
Silica Rotor: Efficiently absorbs moisture from the air, even in extremely low temperatures.
3 Hole Design: Air in, dry air out & wet air exhaust. Moisture is removed by the absorbent and it is purged from the system as water vapour. This means there is no internal water tank to empty and the dehumidifier can be left to run 24/7.
Duct Air In & Out: The dehumidifier has vents fitted with flanges. Air can be vented in and out using simple ducting.
Compact & Portable Size: Can be used in very small spaces, such as cabins, engine rooms, cupboards, crawl spaces and more.
Remote Hygrostat Available: Allows you to set a desired humidity level and the unit will switch on and off as required to maintain the set humidity.
The Cotes CR400B is the largest desiccant dehumidifier in the Cotes mobile range. It is built to be a compact yet tough drying unit, ideal for challenging industrial applications.
This dehumidifier has moisture removal capacity of 1.4 kg/h (up to 33 litres per day). It is capable of operating at extremely low temperatures, where a compressor dehumidifier would fail to perform.
As it is a desiccant dehumidifier, the Cotes CR400B extracts moisture from the air using a moisture absorbent silica gel on a rotor.
Air is drawn into the unit through an air inlet, by an internal fan. Moisture is extracted as the air blows through the silica gel. A heating coil heats the silica gel rotor to release the collected moisture as vapour. This moisture vapour is released out of the unit through the humid air outlet. The dry air is released out of a dry air outlet on the unit.
Lengths of ducting can be fixed on to the air inlet and outlets on this dehumidifier, so air can be ducted in and out from separate spaces.
These heavy-duty industrial dehumidifiers are built to the highest standards, to perform in challenging conditions. They can be used during construction, following floods, for small scale dry storage, in waterworks and utilities plants, in aircraft, vehicles and boats, and much more.
See More Like This: Desiccant Dehumidifiers, Industrial Dehumidifiers & Large Dehumidifiers
Dry Air Nominal: 400 m3/h
Regeneration Air Nominal: 90 m3/h
Supply: 230v
Connected Load: 1.97 kW
Regeneration Air Heater: 1.84 kW
External Fuses: 10
Ext. Pressure Process Air: 50
Ext. Pressure Regeneration Air: 50
Moisture Removal Capacity: 1.4 kg/h (33L in 24h)
Dimensions (W x D x H): 410 x 470 x 405
Weight: 28kg
Duct Connections
Process Air Inlet: 1210 x 350
Process Air Outlet: Ø125
Regeneration Air Outlet: Ø80
There are currently no reviews for this item, why not be the first?
Whether you need a long-term, short-term, or temporary climate solution, sometimes it can help if you can break the costs down, especially if the situation is unexpected or an emergency.
To help our customers and make climate control and air quality equipment more accessible, we've worked with PayPal to provide a way to spread the cost with PayPal Pay in 3. You can use Pay in 3 for eligible shopping cart amounts between £30.00 to £2,000.00. Terms apply.