Call FREE for expert advice
0808 196 9380
Moisture Removal Rate of 55L/24hr: High levels of moisture extraction. Perfect for drying out rooms following decorating works, renovations, floods, leaks, and more.
Auto Condensate Pump: Capable of pumping water up to 12m away, including 5m uphill, using the 12m drain hose provided. This means there is no need to continuously empty a water tank and the unit can be left to run for long periods. The uphill pump capabilitity means that the dehumidifier can be used effectively in basements and cellars.
Power Supply Option: The Dri Eaz 1200 is available in 230v and 110v power supplies, so you can select the suitable model for your purposes.
Robust Rotomoulded Housing: The outer shell is made from rotomolded polyethylene that keeps the weight low, but also provides durability and impact resistance on site.
Compact & Portable Design: Compact profile, semi-pneumatic wheels, large handle and integrated loading skids make the unit very easy to move between sites and to places where it can be most effective.
Stackable: Two units can be stacked on top of each other for easy transport and storage.
Safety Cut-Out Switch: The condensate pump features a safety cut out in case the water outlet is accidentally blocked for any reason.
3M™ HAF Filter: Installed as standard, the HAF filter helps to capture airborne dust while maintaining good airflow through the unit. They are easily installed and replaced, and replacements are available.
LayFlat Ducting Available: You can attach Dri-Eaz layflat ducting to the expel air vent on the back of your dehumidifier. It is made from a strong 4mm poly which comes in 152.4 metre rolls that are nominally 26.2cm wide and expands up to 33cm in diameter. You can cut the ducting to length.
Integrated Duct Ring: Allows for easy duct attachment and helps distribute dry air across a wide area. Allows fresh outside air into the space rather than just circulating stale air.
Hot-Gas Bypass: Provides faster defrosting and helps to prevent condensate from freezing on the evaporator coil when the system is operating at extremely low load conditions.
Manual Pump Purge: Empties water from the pump reservoir. During normal operation, the pump purges automatically every six minutes or whenever the reservoir is full.
Electronic Control Panel: Incredibly intuitive and easy to read. It features simple controls, hour counter and diagnostic aids.
The Dri-Eaz DrizAir 1200 is tough, robust and effective compressor dehumidifier. Available in both 110v and 230v, this unit is trusted by hire companies and trade professionals all over the world for drying out spaces effectively following wet trade work such as construction, plastering and decorating, as well as following leaks and floods.
The Dri Eaz 1200 dehumidifier can remove up to 55 litres of water in 24 hours and can be left to run unattended safely, maximising the extraction of moisture. It offers the ideal solution for flood damage restoration, new build drying, renovations, and managing humidity in residential and commercial spaces such as gymnasiums, server rooms, and storage areas. It helps to prevent moisture damage, condensation, damp, mould and helps to ensure trade work runs smoothly and finishes on time. You can even duct the dry, warm air from the dehumidifier to where you need it to improve air movement and accelerate drying.
This professional dehumidifier is designed to perform in challenging site conditions. The outer shell is made from rotomolded polyethylene that keeps the weight low, but also provides durability and impact resistance on site. This unit thrives in difficult environments and withstands the hard-wearing demands of trade use.
Dri-Eaz offers a 2 year limited warranty on the dehumidifier and also offers a lifetime guarantee on the rotomoulded housing. Its compact profile, large handlebar and semi-pneumatic wheels make it very easy to move between sites and into the places where it can be most effective. The stackable design allows two units to be stacked safely on top of each other for convenient transport and storage.
This compressor dehumidifier works by drawing in the air from a room and passing it over cold coils - similar to the coils in a fridge. Moisture in the air condenses on to the cold coils and the water droplets are collected by the dehumidifier and pumped out by the internal condensate pump through a supplied 12m drainage hose. This hose can be placed in a suitable drainage point, allowing the dehumidifier to be left to run continuously, without the need to empty a water tank. The pump can even push moisture up to 5m uphill, so it is suitable for use in basements and cellars. The automatic pump also has a safety cut out in case the water outlet is accidentally blocked for any reason.
The Dri Eaz 1200 dehumidifier has a 3M™ HAF filter as standard, an integrated duct ring for easy duct attachment, a hot-gas bypass for faster defrosting, and a manual pump purge included. The electronic control panel is incredibly intuitive and easy to read. It features simple controls, hour counters, and diagnostic aids.
We are an authorised seller of the Dri Eaz Driz Air 1200 dehumidifier, so the product comes with the full 2 year manufacturers warranty, 6 year sealed refrigeration system warranty and lifetime guarantee on the rotomoulded housing. This unit is a tried, tested and a proven favourite for water damage restoration, construction professionals and hire companies.
See More Like This: Compressor Dehumidifiers, Flood Dehumidifiers, Garage Dehumidifiers, Industrial Dehumidifiers & Large Dehumidifiers
Supply Voltage: 110v or 230 V
Type: Standard Refrigerant
Water Removal (32.2°C/90% RH): 55 L / Day
Water Removal (26.7ºC/60%RH) 28 L / Day
Amp Draw: 6.7 A (110V) or 3.0A (230V)
Power Consumption: 0.737 KW / Hour for the 110V or 0.69 KW / Hour for the 230V
Operating Temperature Range: 1 - 38 °C
Operating Humidity Range: 40 - 100 %
Dimensions (H × W × D): 83 × 50 × 50 cm
Weight: 36 KG
Airflow: 325 M³ / Hour
Controls: Electronic Touchpad (4 Languages)
Hour Counter: Yes
Humidistat: No
Remote Monitoring Capability: No
Refrigerant Type: 410A
Defrost: Hot-gas Bypass
Compressor: 1.954 KW (110V) or 1.868 KW (230V)
Average Noise Level: 55 db (110V) or 60 db (230V)
Condensate Removal: Automatic Pumpout - Centrifugal
Drain Hose Length: 12.2 M
Power Cord Length: 7.6 M
Plug: 2P+E 16A BS4343 (110V) or 3 Pin BS1363 (230V)
Air Filter: 3M™ HAF (High Airflow Filters)
Housing: Rotomoulded Polyethylene
Wheels: 30cm Dia Semi-pneumatic
Handle: Rigid
Cable & Hose Storage: Yes
Stackable: Yes - 2 Units For Storage
Safety Mark: CE
Product Warranty: 2 Years - Limited
Refrigeration System Warranty: 6 Years
Housing Warranty: Lifetime
Dri-Eaz DrizAir 1200 Dehumidifier
12m Drainage Hose
7.6m Power Cord
Pro 4 Air Filter
Delivered prompty, longlasting product, top notch customer service, cheers
Have ordered from here before, consistently positive experiences and great qual products
Swift delivery as always, just when I need it most. Sturdy, reliable and quality as always too. Thanks!
reliable addition to our work, don't know what we'd do without it now
Whether you need a long-term, short-term, or temporary climate solution, sometimes it can help if you can break the costs down, especially if the situation is unexpected or an emergency.
To help our customers and make climate control and air quality equipment more accessible, we've worked with PayPal to provide a way to spread the cost with PayPal Pay in 3. You can use Pay in 3 for eligible shopping cart amounts between £30.00 to £2,000.00. Terms apply.