Call FREE for expert advice
0808 196 9380
Marine Grade Stainless Steel: Made from marine grade 316 stainless steel - resistant to corrosion from salt water and other chemicals. Parts are heat treated for strength & durability. Designed for drying out areas on boats, equipment, sails and clothing. Also suitable for a range of other challenging drying applications.
Zeolite Absorbent: Efficiently and effectively removes moisture from the air, even in extremely low temperatures.
-20℃ to +40℃ Operating Temperature Range: The dehumidifier is effective in the most challenging conditions, in areas where a refrigerant dehumidifier would be no use.
3 Hole Design: Air in, dry air out & wet air exhaust. Moisture is removed by the absorbent and it is purged from the system as water vapour. This means there is no internal water tank to empty and the dehumidifier can be left to run 24/7.
Duct Air In & Out: The dehumidifier has vents fitted with flanges. Input air and wet exhaust air can be vented using simple ducting. This means air can be ducted in from anywhere in a building, on a boat or yacht, and the wet air can be exhausted outside.
Compact Size: Can be installed in very small spaces, such as cabins, engine rooms, cupboards, crawl spaces and more. It can also be used as a portable dehumidifier with ease, using the carry handle.
Dust Filter: Features a reticulated dust filter in a metal frame that can be cleaned easily or replaced when required to prevent dust particles entering the unit and impeding performance.
Humidistat Control: These dehumidifiers have their own internal humidistat. They can also be used with a remote humidistat, available as an optional accessory. A humidistat allows you to set a required humidity level in the space that you want to dry out, and it will switch the dehumidifier on and off automatically, as required, in order to maintain the desired humidity level. This adds extra convenience, as it means you do not need to continually switch the dehumidifier on and off yourself. It also saves energy and money!
Four Feet: Anti scratch plastic feet swivel out to provide anchor points for the dehumidifier if it is being installed on a wall or ceiling.
Auto Reset: If there is an interruption to the power supply, the dehumidifier will continue to operate as soon as the power has been returned. Perfect in locations where the there is a “dirty” power supply that can affect other electronically controlled products.
5m Power Cord: Plenty of cable to allow for easy installation in crawl spaces or lofts in the home for example.
Long Service Life: Ecor Pro dehumidifiers are professional pieces of equipment, built to last. They are designed to provide years of reliable service. They are very easy to maintain and service when required. The easy to access design keeps service simple and costs low.
The Ecor Pro DH1211 desiccant dehumidifier is one of the smallest 110v marine dehumidifiers available. It is designed for use on all vessels, in shipping yards and in a range of other challenging areas. These boat dehumidifiers are suitable for use in cabins and other compartments to control humidity levels and to prevent the growth of damp, mould, bacteria and rot that can lead to wear and damage. They are also ideal for drying sails, ropes, equipment and clothes after they have been drenched in saltwater. The Ecor Pro DH1211 DryBoat is a commercial grade 110v dehumidifier made from stainless steel - offering a level of resistance to corrosion caused by salt and chemicals that other dehumidifiers cannot match. It is a quality piece of equipment with a 124m3/h air volume capacity and the capability to be left to run continuously 24/7. It is suitable for use in any climate, and offers a vast moisture extraction volume with low energy consumption. The 110v 50Hz supply can be run off a 12v DC-220v AC converter or 110v to 220v transformers. Desiccant dehumidifiers work differently to refrigerant dehumidifiers. They draw in moist air, and pass it through an absorbent mesh on a rotary wheel. As the wheel turns, it absorbs much of the moisture from the air. An internal fan then expels the dry air back out via 1 outlet while the moisture is vented away separately via the wet air exhaust outlet. As it does not use a refrigerated heat exchange to create condensation, they are more efficient and effective in lower temperature environments and during the colder months when traditional dehumidifiers just cannot perform well. This robust Ecor Pro dehumidifier has an operating temperature range of -20℃ to 40℃!
In an article reviewing the 'Best Boat Dehumidifiers', Yachting World state - "dehumidifiers are an essential investment to help protect the interior of a yacht over the winter months". The respected sailing magazine has been publishing articles, news, and reviews since 1894 and its writers are passionate about all aspects of sailing. In their 2019 dehumidifiers review, they singled out the Ecor Pro DryBoat 12 as their number one choice. After extensive trials, they state that the Ecor Pro DryBoat 12 "delivered exceptional results all summer in tough environments such as Spitsbergen and Norway", and that, "It is rare that we rate something this highly but the DryBoat 12 has proven to be a superb marine dehumidifier". Yachting World outline how the 12 litre capacity, commercial grade construction and wet air exhaust outlet set it apart from the competition.
The Ecor Pro DH1211 DryBoat dehumidifier is designed to perform in demanding environments. It is a small, compact unit that is easy set up temporarily or as a permanent fixture. There are 4 anti-scratch plastic feet which swivel out to act as anchor points so you can install the DH1211 at any angle. All of the components are high quality, and they are heat treated to provide longevity. Maintenance and repair are also easy because the cover can be removed quickly for access to worn parts and cord sets. The reticulated dust filter can also be easily removed to be cleaned or replaced to prevent any ingress that could enter the unit and impact its performance. The Ecor Pro DH1211 DryBoat 12 uses a 3 vent system that consists of 1 inlet and 2 outlets. The inlet draws in air so that it can be dust filtered and dried. One outlet expels this processed air back out into the space again. The second wet air exhaust outlet ensures that the moisture is vented away. Ducting allows you to manage the moisture in any part of your boat with the dehumidifier installed in an adjoining space. As the DH1211 DryBoat expels moist air through the vent rather into a tank or drain, it can be left operating almost indefinitely.
The input air can be ducted in using 125mm diameter ducting. The dry air can be ducted out using 125mm ducting. The wet air exhaust can be connected to 45mm ducting. You can add ducting options to your order using the tick boxes above. Other accessories include a humidistat, which allows you to set a desired humidity level so that the dehumidifier switches on and off automatically in order to maintain the pre-set humidity level.
See More Like This: Desiccant Dehumidifiers, Industrial Dehumidifiers & Wall Mounted Dehumidifiers
Ecor PRO DH1211 INOX 110v DryBoat 12 Litre Desiccant Dehumidifier
Weight: 6.4 kg
Dimensions: 280mm × 190mm × 190mm
Technology: Desiccant
Max extract: 12L
Power / Plug: 550W, 110v, 50Hz / 4.6A
(110v 50Hz supply can be run off a 12v DC-220v AC converter or 110v to 220v transformers)
Cord length: 3m
Colour / Material: Stainless Steel
Duct sizes: 40mm - 125mm
Swimming pool ready: No
Humidistat inside / Humidistat option: Yes / Yes
Carrying handle / Water container: Yes / No
Fan speeds / Sound: 1 / 52dB
Operating temp: -20℃ to 40℃
Power out restart / Works from DC-AC convertor: Yes / Yes
Airflow M3/HR: 124 process / 20 exhaust
Approval: CE
Does exactly what it says on the tin, made to last and shipped out fast, thanks
first time ordering here and will be ordering again for sure, arrived quickly and as expected
Won't be ordering anywhere else again! Top notch quality, high speed delivery, what else can you ask?
Professional quality, speedy delivery and great communication
Reliable and longlasting, I can trust this to do a great job, quickly shipped too
Whether you need a long-term, short-term, or temporary climate solution, sometimes it can help if you can break the costs down, especially if the situation is unexpected or an emergency.
To help our customers and make climate control and air quality equipment more accessible, we've worked with PayPal to provide a way to spread the cost with PayPal Pay in 3. You can use Pay in 3 for eligible shopping cart amounts between £30.00 to £2,000.00. Terms apply.