Call FREE for expert advice
0808 196 9380
Marine Grade Stainless Steel: Made from marine grade 316 stainless steel - resistant to corrosion from salt water and other chemicals. Parts are heat treated for strength & durability. Designed for drying out areas on boats, equipment, sails and clothing. Also suitable for a range of other challenging drying applications.
Zeolite Absorbent: Efficiently and effectively removes moisture from the air, even in extremely low temperatures.
-20℃ to +40℃ Operating Temperature Range: The dehumidifier is effective in the most challenging conditions, in areas where a refrigerant dehumidifier would be no use.
3 Hole Design: Air in, dry air out & wet air exhaust. Moisture is removed by the absorbent and it is purged from the system as water vapour. This means there is no internal water tank to empty and the dehumidifier can be left to run 24/7.
Duct Air In & Out: The dehumidifier has vents fitted with flanges. Input air and wet exhaust air can be vented using simple ducting. This means air can be ducted in from anywhere in a building, on a boat or yacht, and the wet air can be exhausted outside.
Compact Size: Can be installed in small spaces, such as cabins, engine rooms, crawl spaces, lofts and more. It can also be used as a portable dehumidifier with ease, using the carry handle.
Dust Filter: Features a reticulated dust filter in a metal frame that can be cleaned easily or replaced when required to prevent dust particles entering the unit and impeding performance.
Optional Humidistat Control: These dehumidifiers can be used with a remote humidistat, available as an optional accessory. The humidistat allows you to set a required humidity level in the space that you want to dry out, and it will switch the dehumidifier on and off automatically, as required, in order to maintain the desired humidity level. This adds extra convenience, as it means you do not need to continually switch the dehumidifier on and off yourself. It also saves energy and money!
Four Feet & Carry Handle: Make the dehumidifier easy to transport & put in place. The handle can be removed if the unit is being installed.
Auto Reset: If there is an interruption to the power supply, the dehumidifier will continue to operate as soon as the power has been returned. Perfect in locations where the there is a “dirty” power supply that can affect other electronically controlled products.
5m Power Cord: Plenty of cable to allow for easy installation in crawl spaces or lofts in the home for example.
Long Service Life: Ecor Pro dehumidifiers are professional pieces of equipment, built to last. They are designed to provide years of reliable service. They are very easy to maintain and service when required. The easy to access design keeps service simple and costs low.
The Ecor Pro DH2500 DryBoat 35 is a compact, robust, high capacity desiccant dehumidifier. It is specifically designed to perform well on boats, marine environments and other area with extreme, challenging and diverse conditions. Marine dehumidifiers protect all types of waterborne vessels such as yachts and boats, plus sailing equipment. They ensure that they are not damaged by damp, mould and corrosion. Damaged equipment can be dangerous to use and can be expensive to repair or replace. Boat dehumidifiers are ideal for drying the hull or cabin of a vessel, and shipyard buildings. They are also perfect for drying sails, ropes, and clothes quickly. The stainless steel construction of the DH2500 INOX DryBoat dehumidifier gives it a level of corrosion resistance that can not be matched by traditional dehumidifiers made from domestic grade metals. Additionally, maintenance and repair is easy with the removable cover for access to replace cord sets or warn parts, extending the service life of this quality dehumidifier. The 220v 50Hz supply can be run off a 12v DC-220v AC converter or 110v to 220v transformers.
The Ecor Pro DH2500 INOX DryBoat 35 is a desiccant dehumidifier with an extraction rate of 35 litres per day. This rate is equivalent to a 70 litre refrigerant dehumidifier working at 18℃. Desiccant dehumidifiers are very different from refrigerant dehumidifiers. They absorb moisture like a sponge instead of creating condensation, and they do not produce or collect any water. Instead, an internal fan expels the dry air back into the space while the moisture is vented away separately via a wet air exhaust outlet. The Ecor Pro DH2500 DryBoat 35 has 3 vents to help manage this efficient system. The 3 vent system enables it to function in lower temperature environments and during the colder months when others might struggle to perform. It also means that the dehumidifier can be left running continuously 24/7. Each of the 3 vents has an integrated flange so that optional flexible industrial ducting can be attached. Ducting allows you to direct air into and out of the dehumidifier so that you can reduce the moisture in different areas without moving the unit.
The inlet air and outlet dry air can be ducted in using 125mm ducting. The wet air exhaust can be ducted using 85mm ducting. Other accessories include a humidistat. The humidistat connects to the dehumidifier and can be used to set the required relative humidity level in the space. The humidistat will automatically switch the dehumidifier on and off as required in order to maintain the pre-set humidity level. You can add these accessories to your order using the tick boxes above.
The Ecor Pro DH2500 INOX DryBoat 35 is designed to thrive in challenging environments. It is a hard-wearing and reliable dehumidifier with an operating temperature range of -20℃ to 40℃. It is extremely efficient and effective in lower temperature environments but is suitable for any climate. It is a small, compact unit weighing just 17.5kg and it has sturdy handles to allow for easy carrying. This dehumidifier can be moved around by 1 person and set up in various areas, or it can be installed as a permanent fixture in a specific spot. There are 4 anti-scratch plastic feet which swivel out to act as anchor points. This is an extremely versatile and durable desiccant boat dehumidifier, with a robust construction and high quality, heat treated components. You can order an Ecor PRO DH2500 INOX DryBoat 35 desiccant dehumidifier using our online checkout, or you can call us directly. Our friendly sales team can process your order and payment and also answer any questions that you might have before you commit to a purchase.
Please be aware, this product is supplied with a 16a plug from factory due to production regulations from the country of origin. This unit can be hardwired with a suitable fuse, used with a 16a/13a converter or a standard 13a three-pin plug can be retrofitted to the power cable. Doing so will not negatively impact the performance or safety of the unit, and will not affect your warranty. Contact the sales team for further information.
See More Like This: Desiccant Dehumidifiers, Large Dehumidifiers & Wall Mounted Dehumidifiers
Ecor PRO DH2500 INOX DryBoat 35 Litre Desiccant Dehumidifier
Weight: 17.5 kg
Dimensions: 560mm × 352mm × 345mm
Technology: Desiccant
Max extract: 35L
Power / Plug: 900W, 220v, 50Hz / 3.5A
(220v 50Hz supply can be run off a 12v DC-220v AC converter or 110v to 220v transformers)
Cord length: 5m
Colour / Material: Stainless Steel
Duct sizes: 80mm - 125mm
Swimming pool ready: No
Humidistat inside / Humidistat option: No / Yes
Carrying handle / Water container: Yes / No
Fan speeds / Sound: 1 / 56dB
Operating temp: -20℃ to 40℃
Power out restart / Works from DC-AC convertor: Yes / Yes
Airflow M3/HR: 380 process / 75 exhaust
Approval: CE
Does exactly what it says on the tin, made to last and shipped out fast, thanks
Can see us depending on this for a while, great quality for the cost and quick delivery
A great purchase, hard wearing and works perfectly
Great customer service and responses, quick delivery and outstanding product
delivered just on time - absolute life saver! Clearly high quality materials, thankyou
Whether you need a long-term, short-term, or temporary climate solution, sometimes it can help if you can break the costs down, especially if the situation is unexpected or an emergency.
To help our customers and make climate control and air quality equipment more accessible, we've worked with PayPal to provide a way to spread the cost with PayPal Pay in 3. You can use Pay in 3 for eligible shopping cart amounts between £30.00 to £2,000.00. Terms apply.