Marine Grade Stainless Steel: Made from marine grade 316 stainless steel - resistant to corrosion from salt water and other chemicals. Parts are heat treated for strength & durability. Designed for drying out areas on boats, equipment, sails and clothing. Also suitable for a range of other challenging drying applications.
Zeolite Absorbent: Efficiently and effectively removes moisture from the air, even in extremely low temperatures.
-20℃ to +40℃ Operating Temperature Range: The dehumidifier is effective in the most challenging conditions, in areas where a refrigerant dehumidifier would be no use.
3 Hole Design: Air in, dry air out & wet air exhaust. Moisture is removed by the absorbent and it is purged from the system as water vapour. This means there is no internal water tank to empty and the dehumidifier can be left to run 24/7.
Duct Air In & Out: The dehumidifier has vents fitted with flanges. Input air and wet exhaust air can be vented using simple ducting. This means air can be ducted in from anywhere in a building, on a boat or yacht, and the wet air can be exhausted outside.
Compact Size: Can be installed in very small spaces, such as cabins, engine rooms, cupboards, crawl spaces and more. It can also be used as a portable dehumidifier with ease, using the carry handle.
Dust Filter: Features a reticulated dust filter in a metal frame that can be cleaned easily or replaced when required to prevent dust particles entering the unit and impeding performance.
Humidistat Control: These dehumidifiers have their own internal humidistat. They can also be used with a remote humidistat, available as an optional accessory. A humidistat allows you to set a required humidity level in the space that you want to dry out, and it will switch the dehumidifier on and off automatically, as required, in order to maintain the desired humidity level. This adds extra convenience, as it means you do not need to continually switch the dehumidifier on and off yourself. It also saves energy and money!
Four Feet: Anti scratch plastic feet swivel out to provide anchor points for the dehumidifier if it is being installed on a wall or ceiling.
Auto Reset: If there is an interruption to the power supply, the dehumidifier will continue to operate as soon as the power has been returned. Perfect in locations where the there is a “dirty” power supply that can affect other electronically controlled products.
5m Power Cord: Plenty of cable to allow for easy installation in crawl spaces or lofts in the home for example.
Long Service Life: Ecor Pro dehumidifiers are professional pieces of equipment, built to last. They are designed to provide years of reliable service. They are very easy to maintain and service when required. The easy to access design keeps service simple and costs low.
The Ecor Pro DH811 DryBoat is a stainless steel desiccant dehumidifier with an extraction capacity of 8 litres per day. It is extremely practical, robust, and compact - it is one of the smallest 8 litre dehumidifiers on the market. It is specifically designed to be left running continuously and does not have a water tank that needs emptying. Instead, this dehumidifier contains an efficient axial fan and wet air exhaust with a push fitting that can be easily attached to ducting to vent out the moisture. It is also an extremely efficient and practical desiccant dehumidifier. Desiccant dehumidifiers draw in moist air and pass it through an absorbent mesh on a rotary wheel. The wheel turns and absorbs the moisture from the air before a fan expels the dried air back out into the space. Desiccant dehumidifiers work well in lower temperature environments and during colder weather. They can be beneficial as traditional refrigerant dehumidifiers might struggle to perform in these conditions.
The Ecor Pro DH811 INOX desiccant dehumidifier has a vast operating temperature range of -20℃ to +40℃, and a 380m3/h air volume capacity. The high quality INOX construction offers resistance to corrosion caused by salt and chemicals. It is capable of performing continuous drying in the most difficult environments, and it is capable of a large moisture extraction volume with low energy consumption. This unit is purpose built for use inside boats, ships, yachts and in other challenging areas. It is perfect for regulating the humidity levels in cabins and other compartments to prevent the effects of damp, mould and bacteria that can lead to wear and damage. It is ideal for drying sails, ropes, equipment and clothes quickly after they have been drenched in harmful saltwater. This Ecor Pro dehumidifier can also be used for drying in a range of other challenging areas where other dehumifiers would not be up to the task. For example, IcelandAir use these dehumidifiers to keep their jet engines dry while their planes are in storage (pictured above).
The Ecor Pro DH811 boat dehumidifier uses a multidirectional system with 1 inlet and 2 outlets for efficiency. One outlet expels the dry air back into the space and the second outlet exhausts the wet air out of the space. The wet air exhaust vents the moisture out in any direction, including upwards, so the unit can be used in any part of a boat, plus in basements and lower ground levels of shipyard buildings. By extracting the moisture completely, the dehumidifier can work in colder conditions. The inlet draws in the moist air in through the front of the dehumidifier. The inlet features an integrated flange which is designed to attach to optional flexible ducting. The ducting enhances the versatility of the unit because it can draw in air from any space, including rooms that are separate from where the dehumidifier is located. The inlet air can be ducted in using 125mm ducting and wet air exhaust can be ducted using 45mm ducting.
You can order an Ecor Pro DH811 Inox 110v DryBoat 8 dehumidifier online or by phone. Optional accessories such as a humidistat and flexible industrial ducting for each of the outlets are also available. The humidistat connects to the dehumidifier and can be used to set the required relative humidity level in the space. The humidistat will automatically switch the dehumidifier on and off as required in order to maintain the pre-set humidity level. You can select these extras using the tick boxes above.
See More Like This: Desiccant Dehumidifiers & Wall Mounted Dehumidifiers
Ecor Pro DH811 Inox 110v DryBoat 8 Litre Desiccant Dehumidifier
Weight: 4.8 kg
Dimensions: 190mm × 190mm × 190mm
Technology: Desiccant
Max extract: 8L
Power / Plug: 350W, 110v, 50Hz / 2.9A
Cord length: 3m
Colour / Material: Stainless Steel
Duct sizes: 45mm - 125mm
Swimming pool ready: No
Humidistat inside / Humidistat option: Yes / Yes
Carrying handle / Water container: Yes / No
Fan speeds / Sound: 1 / 49dB
Operating temp: -20℃ to 40℃
Power out restart / Works from DC-AC convertor: Yes / Yes
Airflow M3/HR: 90 process / 14 exhaust
Approval: CE
The Ecor Pro is a great little unit, you need to see it to full appreciate how small it is. It is discreet and works exceptionally well!
Great customer service and responses, quick delivery and outstanding product
I thoroughly believe you wont find a better deal and experience elsewhere. Fast shipping, helpful customer service, high product quality.
Definitely a worthy investment, solid product reliable and quick delivery
Trusty and hardwearing, arrived so quickly and easy to use!
just what I've been lookin g for, fast responses on questions and quick delivery, thanjks
Whether you need a long-term, short-term, or temporary climate solution, sometimes it can help if you can break the costs down, especially if the situation is unexpected or an emergency.
To help our customers and make climate control and air quality equipment more accessible, we've worked with PayPal to provide a way to spread the cost with PayPal Pay in 3. You can use Pay in 3 for eligible shopping cart amounts between £30.00 to £2,000.00. Terms apply.
