Call FREE for expert advice
0808 196 9380
41kW Heat Output: Large capacity fixed space heater, ideal for heating workshops, garages, warehouses, agricultural buildings and a range of other industrial spaces effectively.
Two Heat Settings: The Thermobile Bio Energy 2 can operate at full capacity of 41kW or reduced capacity of 24kW, so you can select an appropriate heat level for your space.
100% Clean Warm Air: This unit circulates only clean, fume-free warm air, as the fumes produced during combustion are exhausted outside.
Range Of Fuel Options: Can be fuelled by biofuels, such as rapeseed oil and certain vegetable oils, waste oil and diesel. This provides a great cost saving, as you can fuel the heater using oils produced in the course of your everyday business.
High Capacity Axial Fan: Provides a constant flow of warm air, at a max airflow of 3000m³/hr, to heat the space efficiently and effectively.
Built-In Heat Exchanger: All gasses pass through the heat exchanger before entering the flue, achieving excellent efficiency.
Separate Combustion Air Intake: The combustion fan draws in clean air from outside of the building, ensuring that no vapours, dust or oxygen can be sucked in from the workshop floor.
55L Fuel Tank: Provides plenty of fuel to keep the heater running, can be topped up easily when needed and can be removed for cleaning.
150mm Flue: The exhaust can be connected up to lengths of flue pipe in order to vent fumes outside. (Flue Kit available as an accessory).
230v Power Supply: The heater can be plugged easily into any standard 230v power socket, for convenience and ease of installation.
Plug & Play Design: Can be installed easily by any tradesperson. It simply needs a hole to be created in a wall for exhaust fumes to be flued outside, a hole for the fresh air intake, and then plugged into a standard 240v plug socket.
Overheat Protection: Shuts the heater down automatically if it starts to overheat, preventing an accident.
The Thermobile Bio Energy 2 is a 41kW biofuel cabinet heater, ideal for workshops, garages, warehouses, agricultural buildings and a range of other industrial spaces. It can be fuelled using Bio oil, bio diesels and various vegetable oils, rapeseed oil, linseed oil, as well as waste oil and standard diesel or red diesel.
The Thermobile Bio Energy range of cabinet heaters has been developed specifically for the workshop heating market. Full combustion is achieved in a vaporising system and non-burnable residue is retained in the burner pan. The high efficiency of the Bio Energy 2 is achieved by a built-in, large surface heat exchanger, through which all gases pass before entering the flue. A high-capacity axial fan draws air from the workshop over the heat exchanger and combustion chamber and expels warm air into the building, providing a constant recycling of warm air. This fan provides a high airflow of 3000 m3/h.
This heater helps to save on fuel costs, offers low emissions of harmful gases and provides 100% clean heat, as the exhaust fumes produces during combustion are flued out of the back of the unit.
The Bio Energy 2 cabinet heater has a 55-litre fuel tank, an overheat security thermostat, flame failure thermostat and an oil overflow security system fitted as standard. This waste oil burner has a fixed outlet temperature of 50-70 ° C and it has a switch that allows it to operate either at 41kW or 24kW, so you can select the ideal heat output for your space.
We have an optional flue kit available for the Thermobile BioEnergy 2 cabinet heater, which allows you to exhaust the fumes produced during combustion out of the space. The flue kit consists of a T piece complete with draught stabiliser, 5 x 1m lengths of flue piping (150mm diameter), a rain cap, 2 x adjustable wall brackets and a high temperature silicone rubber roof flashing & fitting kit.
If your ceiling is higher than 5m, we can supply extra sections of 1m piping. We can also supply pipes with a 45 degree bend, so you can flue fumes out at an angle, if required for your space. A minimum of 4-5m of flue installation must be internal due to flue operating temperatures and are not suitable for installation with a 90-degree bend. If you require any extra parts or advice, give our sales team a call and we can customise a flue kit to suit your requirements.
See More Like This: Cabinet Heaters, Factory & Warehouse Heaters, Farm Heaters, Garage & Workshop Heaters & Waste Oil Heaters
Min Capacity BTU/hr: 85,000
Max Capacity BTU/hr: 146,000
Min Fuel Consumption L/hr: 2.5
Max Fuel Consumption L/hr: 4.3
Tank Capacity Litres: 55
Weight Kg: 135
Current A: 1
Flue Connection Ø(mm): 130
Heated Airflow m³/hr: 3000
Max Space Heated cu.ft: 28,000
Width mm: 820
Depth mm: 1100
Height mm: 1080
Thermobile Bio Energy 2 Cabinet Heater
Flue Kit includes:
1 x T Piece complete with Draught Stabiliser
5 x 1m lengths of Flue Piping (150mm dia)
1 x Rain Cap
2 x Adjustable Wall Brackets
1 x High Temperature Silicon Rubber Roof Flashing & Fitting Kit
Won't be ordering anywhere else again! Top notch quality, high speed delivery, what else can you ask?
Will be ordering more in the future for sure, very impressed with delivery speed and customer service
Quick shipping, no messing around, trusty product - very pleased Solid and dependable, absolutely perfect, and was delivered so promptly
What a brilliant product, high value for its cost, and arrivd quickly works exactly as described, shipped quicker than expected
Exceptional quality, customer service and speedy delivery
Whether you need a long-term, short-term, or temporary climate solution, sometimes it can help if you can break the costs down, especially if the situation is unexpected or an emergency.
To help our customers and make climate control and air quality equipment more accessible, we've worked with PayPal to provide a way to spread the cost with PayPal Pay in 3. You can use Pay in 3 for eligible shopping cart amounts between £30.00 to £2,000.00. Terms apply.